Inovalley SM55PRO, Руководство пользователя

Страница: 3 / 12

4. Calibrating the anemometer & installing batteries
After mounting the anemometer, follow these steps to calibrate the wind direction so that the anemometer
properly measures the wind direction and transmit to the monitor. Be sure battery has been removed from the
anemometer before the calibration.
Important:
The same calibration (step 1 to 5) is needed for the first set up and every battery replacement.
1. After mounting the anemometer, loosen the screws on the battery door with a small screwdriver and open
the battery door.
2. Use the compass on the anemometer and turn the wind vane so it is pointing due north.
3. Hold the wind vane pointing due north and do not allow it to turn. Insert 2 pieces of AA batteries according
to the polarity indicated. The red LED indicator above the battery cover of the anemometer will flash few times
right after battery installation. Be sure the vane is pointing due north at the moment when red LED flashes
and the calibration is now completed. Replace the battery cover and tighten the screws.
4. If the wind vane is not pointing due north when the red LED first flashes, remove batteries and repeat step
2 & 3.
5. Hold “CHANNEL/SEARCH” buttons on the monitor to search for remote transmitter. Wind direction, wind
speed, wind chill & channel-1 temperature/humidity readings will appear within 10 minutes if the RF
transmission is successful.