Inoteska Anthrocite ST, Руководство пользователя и инструкция по установке

Страница: 26 / 28

SYSTEMS FOR VOICE AND DATA COMMUNICATION
GSM
GSM GSM
GSM //// ANALOG DOOR
ANALOG DOOR ANALOG DOOR
ANALOG DOOR PHONE STATION
PHONE STATION PHONE STATION
PHONE STATION
"PASSWORD : "
"RADIO DOMAIN (0..99) : "
"RADIO BAND (19 OR 43 e.g. 433 or 868) : "
"RADIO BAUD RATE (0..13) : "
"RADIO OUTPUT POWER (0..7) : "
"RADIO CHANNEL (0..7) : "
"IP ADDRESS : "
"SUBNET MASK : "
"GATEWAY : "
"DNS SERVER : "
"SERVER IP ADDRESS : " (*)
"SERVER PORT : " (*)
"CONFIGURATION PORT : “ (**)
Note:
* - remote server parameters – for attendance data sending
** - port for configuration door entry phone station
! - radio parameters have to be same as in door entry phone station
Firmware can to be changed by using TFTP protocol. After turn on the device,
bootloader is running (short time), led on RJ45 is blinking and firmware can to be
changed.
Command line:
Tftp IP address put “(path) prev_eth_radio.hex”
For example: tftp 192.168.1.100 put “C:\prev_eth_radio.hex”
Default configuration can be set by shorting two pins in connector on PCB before turn
on the device (consult this with producer).
16.3 HW configuration and ordering
COER - P E Bx R
Converter Ethernet/Radio
Power over Ethernet
External antenna
Radio band x=4 (433 MHz) x=8 (868MHz)
Repeater