SYSTEMS FOR VOICE AND DATA COMMUNICATION
GSM
GSM
GSM
GSM //// ANALOG DOOR
ANALOG DOOR
ANALOG DOOR
ANALOG DOOR PHONE STATION
PHONE STATION
PHONE STATION
PHONE STATION
9. Firmware upgrade
- locally:
- by USB interface – HIDBootLoader.exe has to be use on PC
After turn on the device and USB is connected to PC, bootloader is running,
(short time) and firmware can to be changed. In this state it is not possible to
configure the device only after time is overflow.
- remotely (central):
- over USB / GSM converter by data connection (M2M) to GSM door entry
phone station over mobile network by using configuration software
If remote software upgrade was not successful, next attempt can be performed only
locally (by USB) after switching the device off and on.
If PC is connected to device via USB, then each time the device is turned on, it is in
status “upgrade firmware”. To configure the device only, connect PC to device after it
is turned on.