AMTEK Version 7.4 2019-01 Page 3
©Inomatic 2017-2019
F40 tag
Mini Pencil
Super tag II
APX (DR) label
1.
INTRODUCTION
1.1. System Description
The
“AMTEK” range of Acoustomagnetic EAS Systems is fully compatible with all
58 kHz tags and Acustomagnetic labels on the market. The systems are designed to get
optimum detection performance and to avoid false alarms at the same time, by using
digital signal processing and anti-noise algorithm.
The AMTEK Pro-Line antennas with AMPRO V 7.4 electronics can be operated as
“Mono” or “TX” antenna (setting via infoNet V5 onwards)
1.)
Single Mono antenna
2.)
Multi Mono antennas
3.)
Dual system
1 Processor TX and 1 Receiver antenna
4.)
Split system
1 Processor TX and 2 Receiver antennas
Working principle
“Mono”:
A 58 kHz pulsed magnetic field is generated by the
Processor antenna. The Processor antenna is using the same loops for transmitting the
58KHz TX pulses and for receiving the tag/label signal. Any 58 kHz AM label or hard tag
brought into the magnetic field will generate a signal which can be detected in the receiver
mode and subsequently trigger an alarm signal.
Working principle
“TX”:
A 58 kHz pulsed magnetic field is generated between the
Transmitter (TX) antenna and one or two Receiver (RX) antennas. Any 58 kHz AM label
or hard tag brought into the magnetic field will generate a signal which can be detected
by the Receiver antennas and subsequently trigger an alarm signal.
AM Hard Tags and Labels