ffl
Warning - Data Loss
• Ensure that data transfer is complete before you remove the memory card trom the device.
• Always use the "Eject" function of your operating system before removing the removable
storage medium trom the device or disconnecting the device (with inserted storage
medium) trom your computer.
• lf you do not do this, data may be lost.
8. Causes of errors and error rectification
IT:l
Note
Contact our customer service department if the problem remains after taking the following
steps.
The following table can be used to localise and rectify minor errors with the device:
C
0
"'
Ë
0
.5
�
(IJ
C
(IJ
C,
Error
Possible cause
Solution
Device is switched off
Switch on the device.
Power supply adapter not
Ensure that the power supply
adapter is plugged in and
connected correctly
connected to the device.
Display is blank
No mains power
Check your fuse box.
lnform our customer service
Device is faulty
department.
In case that the device shouldn't
By statie electricity, such as
react on any commands or show
occur du ring normal daily use a black screen, reset the device
(carpet, waal sweater), it may by pressing the POWER button
happen that the device will go
on the remote contra[ or on the
Device turns off
into Standby Mode.
backpanel of the device.
Automatic stand by - function
Deactivate or change the
is activated. The device
switches off after 4 hours by
ECO/standby mode in the system
default.
settings.
Innovu BV - Bouwerij 68 - 1185 XX Amstelveen - tel: +31 (0)20 4539590 - www.innovu.nl
