Innovative Technology ITVS-200, Инструкция по эксплуатации

Страница: 4 / 20

1
BEFORE USING THE UNIT
Read this before attempting any operations
• As the unit may become warm during operation, always leave sufficient space
around the unit for ventilation.
• The voltage supplied to the unit should match the voltage as printed on the rear
panel. If you are in any doubt regarding this matter, consult an electrician.
• Choose the installation location of your unit carefully. Avoid placing it in direct
sunlight or close to a source of heat. Also avoid locations subject to vibrations and
excessive dust, heat, cold or moisture.
• Do not place the unit on an amplifier/receiver.
• Do not open the cabinet as this might result in damage to the circuitry or electrical
shock. If a foreign object should get into the unit, contact your dealer or service
company.
• When removing the power plug from the wall outlet, always pull directly on the
plug, never yank the cord.
• To keep the laser pickup clean do not touch it and always close the disc tray.
• Do not attempt to clean the unit with chemical solvents as this might damage the
finish. Use a clean, dry cloth.
• Keep this manual in a safe place for future reference.
DO NOT MOVE THE UNIT DURING PLAYBACK
During playback, the disc rotates at high speed. DO NOT lift or move the unit during
playback. Doing so may damage the disc or the unit.
WHEN MOVING THIS UNIT
When changing the unit’s location, or packing the unit for moving, be sure to remove
the record or disc. Moving this unit with the record or disc loaded may result in
damage to this unit. If the unit is to be packed and moved a great distance, it is also
advisable to tighten the turntable transport locking screw.
See page 5 for instructions.