Innovative Technology ITVS-200, Инструкция по эксплуатации

Страница: 7 / 20

4
CONNECTIONS
HOW TO REPLACE THE STYLUS
The stylus should last about 50 hours under normal use. However, it is
recommended that the stylus be replaced as soon as you notice a change in sound
quality. Prolonged use of a worn-out stylus may damage the record. Wear and tear
on the stylus will be accelerated when playing 78 RPM records. The higher speed of
78 RPM records can wear the stylus more quickly.
Caution:
• Do not bend the stylus.
• To avoid injury, do not touch the needle.
• Turn off the unit's power before you replace the stylus.
• Keep out of the reach of children.
• Handle with care, as the stylus is delicate. Use of a bent or broken stylus may
damage the record and cause the turntable to malfunction.
• Do not expose stylus to extreme heat.
• Contact a qualified repair company if you experience difficulty in changing the
stylus.
Removing an Old Stylus
1. Set a screwdriver at the tip of the stylus and
push down to the direction “A”.
2. Pull the stylus out toward direction “B".
Installing a New Stylus
1. Hold the tip of the stylus and insert
the other edge by pressing toward
direction "C".
2. Push the stylus up toward direction
"D" until it locks at the tip.
Guide Pins (inside)
Audio-Out
FM Antenna
While in FM mode, tune in an FM
station and extend the antenna to
find a position for the best
reception. This antenna may need
to be repositioned if you move
your unit to a new location.
AC Power Cord
Plug the AC power cord into an
AC wall socket.