GB - 3
CONTROLS
1.
Function switch (OFF/AUX/(USB/SD/iPod)/Tuner)
2.
Band switch (FM St./FM/AM)
3.
Handle
4.
Dial Scale
5.
FM Antenna
6.
Tuning Knob
7.
Play/Pause button
8.
Stop/USB/SD/iPod button
9.
Skip
button
10. Skip
button
11. Media Hub Door
12. Speaker
13. Volume knob
14. Clock Display
15. Power Indicator
16. FM St. Indicator
17. Minute button
18. Hour button
19. Clock adjust button
20. Record button
21. Mode button (Repeat 1/All)
22. SD /USB indicator (Green indicator for USB mode,
Red Indicator for SD mode)
23. Indicator for iPod
24. USB slot
25. SD/MMC slot
26. Holder for iPod
27. Mode Indicator
28. Record Indicator
29. Aux In socket
30. Docking for iPod
31. Eject button
32. Battery Door
33. Back up battery compartment (for clock)
34. AC socket
35. Cable compartment
36
.
Extension USB cable.
37. Extension Aux cable.
38. LED sound level meter.
MAINS CONNECTION
Mains Power Supply:
Understand and remember the following instructions to avoid malfunction, fire, injury and electric shock:
• Check if the mains voltage as shown on the type plate (under the set) corresponds to your local mains voltage. This unit is
designed for AC 120V~60Hz.
• Connect the mains lead to the AC mains socket and the wall outlet.
• To disconnect from wall outlet only pull the plug and not the cable.
• Hold the plug tight, when connecting to or disconnecting from wall outlet.
• Do not touch the power cord with wet hands.
• Protect the power cord from heat generating devices.
• Please turn off the player if it has been dropped or is damaged otherwise.
Battery Operation:
• Remove the battery compartment cover
• Insert 8 x UM1 or “D” size batteries, ensuring correct polarity as indicated inside the battery compartment
• Inside the battery compartment and there have a back up battery area for the clock back up batteries and insert 2 x AAA size
batteries with the correct polarity.
Note :
• Keep batteries away from children and pets.
• Insert the batteries observing the polarity (+/-). Failure to properly align the battery polarity can cause personal injury and/or
property damage.
• Remove exhausted batteries from the device. Remove the batteries when the device will not be used for extended periods of time
to prevent damage due to rusted or corroded batteries.
• Never throw batteries into the fire. Do not expose batteries to fire or other heat sources.
