Innovating Technology ITBB-1980iP, Инструкция по эксплуатации

Страница: 4 / 5

GB - 4
CLOCK ADJUST
-
- Press and hold the Clock Adj. button, then press the Hour button to set the Hour.
- After setting the Hour, then Press and hold the Clock Adj. button and press the Min button to set the Minute.
-
LISTENING TO THE RADIO
 Slide the Function Switch to select the Tuner mode.

To choose the radio band (AM, FM or FM St.) slide the BAND switch.
 Search for the station of your choice using the Tuning knob.
 To switch off the radio, Slide the Function Switch to Off mode. Or select the USB/SD or Aux mode.
NOTE: For optimum FM radio reception, extend the FM scope antenna. For AM radio reception, a ferrite bar antenna built into the unit is used.
To improve reception quality, rotate the unit.
USB and SD/MMC FUNCTION
 Slide the Function Switch to USB/SD mode.
 The unit will identify the USB mode first when you insert the USB drive or SD/MMC card together
 Press the Stop/USB/SD button and hold a few seconds to change to SD/MMC card mode, press and hold a few seconds again to change
back into USB mode.
 If your choosing the USB mode and the USB indicator will light up in Green colour, If you are playing the SD/MMC mode and the USB/SD
the indictor will light up in Red colour
 Press the Stop/USB/SD button again and change back to USB or SD mode.
 Press the Skip

button once to go to pervious track,
 Pres the Skip

button once to go to next track
 Press the Play/Pause button to pause the track and press the play button again to continuously play the track.
 Press the stop button once to stop the track.
iPod FUNCTION
 Slide the Function Switch to USB/SD mode.
 Press the Stop/USB/SD button and hold a few seconds to change to the iPod mode.

Insert the iPod to the dock for iPod and start by choosing your song.
RECORD FUNCTION
Record from Radio to USB or SD/MMC (FM only)
 Slide the Function switch and select the Tuner mode
 Select the FM Radio Frequency and Press the Record Button and the record indicator will light up. The unit will identify and record to USB
mode first, Press the Skip

and skip

button to choose record to USB or SD/MMC mode. After selected record to USB or SD/MMC
mode and the USB and SD/MMC indicator will light up. (Green Indictor = USB, Red indictor = SD/MMC)
 Recording will start after 2 - 5 seconds.
 During recording the “LED” indicators will be “Flashing”
 Press “Stop” to stop the recording and a file will be created on the USB or SD card.
 Repeat the above procedure and it will recreate another file of what has been previously recorded.
MODE BUTTON
 Press the Mode button once to repeat the current track. The mode indicator will start flashing.
 Press the Mode button twice to repeat all tracks . The mode indicator will light up.
 Press the Mode button again to cancel the repeat function.
AUX IN FUNCTION
 Slide the function switch to select the Aux in function.
 You can put the other audio sources through the Aux socket by supplied Aux cable .
SPECIFICATIONS
 Mains supply: 120V AC ~ 60Hz
 Radio bands: AM, FM / FM St.
 Frequency range: FM 88 – 108MHz / AM 540 –
1710KHz
 Output power: 2 x 5W RMS, 10% THD