ADJUSTING GRINDER HEAD
1.
Remove front alignment pin.
2.
Align holes to desired position (Right or Left, to 45 degrees or 90 degrees)
3.
Replace alignment pin.
4.
Check that the head is level with the floor and adjust leveling bolt as required
The Predator Easy Edge grinder head can be adjusted to grind up to 90 degrees from the
machine axis, enabling the machine to grind right against the wall.
ELECTRICAL
This tool has a precision-built electric motor. It should be connected to a power supply that is 120 volts, 60
Hz, AC only (normal household current). Do not operate this tool on direct current (DC). A substantial
voltage drop will cause a loss of power and the motor will overheat. If the tool does not operate when
plugged into an outlet, double-check the power supply.
SERVICE
A warranty claim is not valid unless a return authorization has been issued by Innovatech. To obtain
warranty service, buyer must contact Innovatech and receive a return authorization number and return
instructions. Buyer then returns the damaged item or part to Innovatech. Customer is responsible for costs
of shipment.
It is the customer’s responsibility to pay for all non-warranty replacement parts. Non-Warranty labor,
service and adjustments are available and will be charged at Innovatech’s current hourly labor rates. Non-
Warranty service will be billed at Innovatech’s current hourly rates. Call Innovatech for current labor rates
or to speak with a Customer Service Technician. Call 1.800.267.6682 and ask for Customer Technical
Support.
7
