OPERATION
Always wear eye protection when working with or near this product.
Before starting:
1.
Check the floor carefully and remove all bolts, nails as well as any loose material that could get
caught in the machine.
2.
Fit the appropriate tools to the machine.
3.
Fit splash guard to the proper height.
4.
If you are grinding dry, connect Innovatech’s recommended dust collection system and check
vacuum before starting the grinder.
Starting the machine:
1.
Attach appropriate grinding plate.
2.
Adjust the head angle to the proper position. The head of the Innovatech Easy Edge Grinder
may be adjusted right or left of the machine axis to either 45 degrees or 90 degrees.
3.
Check that the grinding head is level to the floor and adjust ¾” bolts as necessary.
4.
Ensure knob/dial is in the off position before plugging into power source.
5.
Connect power to the machine. Up to 120 volt, 15 amp power is required. NOTE: IF THE
WRONG POWER IS SUPPLIED TO THE GRINDER, IT MAY DAMAGE THE ELECTRICAL
COMPONENTS.
6.
Turn knob/dial to desired speed.
Always grip handle firmly when starting machine. The machine will tend to move from side to
side when starting.
7.
When finished with grinding, turn off machine and let the head come to a complete stop before
tilting back the machine.
CAUTION: Tools can be very hot.
Changing of tools:
1.
Before working on the grinder, bring the motor to a total stop and disconnect power.
2.
Tilt machine back on floor – if machine head is adjusted to 45 degrees machine will tip to the
side when tilting back.
3.
USE CAUTION! Tools can be very hot from the friction of grinding. Use gloves for protection.
4.
Use tools to turn center of tool holder to remove tool plate.
5.
Replace with new tool plate and turn lock into place.
6.
Lower machine back down to re-adjust splash guard if necessary. Working height of different
tools varies depending on tools and wear.
Applications:
-You may use this tool for the purposes listed below:
o
Surface Preparation
o
Concrete Polishing
o
Concrete Grinding
WARNING: To prevent loss of control and possible serious personal injury, always operate the grinder
with both hands.
CAUTION: If the grinder is held in one spot too long, it will gouge and/or cut grooves in the floor.
6
