3.2.4 Display
1. Needle Bar RPM Config:
You are able to select between Single
Stage or Progressive shift light.
Single Stage
allows the gauge’s outer LEDs to flash each individual
LED color segment or all at a specific threshold. While Single
Stage is selected, Boost Trace is enabled.
Progressive
allows the gauge’s outer LEDs to flash incrementally.
Boost Trace is disabled when the Progressive shift light is enabled.
2. Single Stage Shift Light:
Allows the configuration of either Green,
Yellow, Red, or All LED segments to flash at the desired shift
threshold. This selection is enabled when Single Stage is selected in
Needle Bar RPM Config.
3. Progressive
Shift
Light:
Allows the configuration of the progressive
shift light at each outer LED segment. This selection is enabled
when Progressive is selected in Needle Bar RPM Config.
