background image

REV. 03/05/2020         PN:              

PG:3

MANUFACTURER WARRANTY

1 year on step and ladder

1 year on hardware.

2257 route 139

Drummondville, Québec

J2A 2G2

WWW.INNOVAPLAS.COM

MAJESTIC 8000 WITH CLASSIC LADDER 6004

F

*MINIMUM 1"

CAUTION

1) 

Slowly submerge the step 

into the pool. Make sure you do 

not damage the pool liner in 

the process.

2)

 Angle the whole step so that 

it is entirely under water. Purge 

all the air from under the steps.

3)

 Apply firm pressure on the 

step to allow the Step Cup to 

stick on the pool bottom.

4) 

Drop the ballast in the step 

hole.

To prevent pool liner puncture, keep a minimum 1" gap between the pool liner

and the rear underside of the step.

G

Security strap

x2

x2

F

1) 

Once the step is in 

the pool secure the 

platform to the top seat 

(see illustration) using 

the two straps provided. 

OPTIONAL

:

Once the pool step has been 

completely assembled and 

secured to the pool, attach the 

2 screws supplied through the 

platform to the top seat of your 

pool to provided a more rigid 

assembly.

H

1) 

Trace a line on each post at 39 inches from the 

ground for 48’’ and 52’’ pools. If you have a 54’’ pool, 

trace a line at 40.5 inches from the ground.

 

2)

 Slide the pivot blocks onto the posts and line up 

with the traced marks. Secure with the screws 

provided.

3) 

Attach the ladder base to the bottom of the posts 

with the screws provided.

4) 

Slide the posts through the platform. Slide the lock 

over right post between the platform and the handrail. 

Secure the platform using the screws provided.

5)

 Slide the posts through the handrails. Insert the post 

covers into the handrails. If they protrude too much, 

raise the handrails until the post covers are seated 

securely on the posts. Secure the short handrails in 

place with the screws provided. 

x18

D

A

D

LOCK

I

1) 

Attach the ladder to the pivot blocks with 

the bolts, washers and nuts provided.

x2

x2

x2

A

B

C

align for 48''

& 52'' pools

align for 54’’

Use sliding lock as a guide to drill hole into 

ladder in up position. Use a 3/8’’ drill bit with 

a cordless drill.

**PADLOCK REQUIRED** 

SWING THE LADDER UP 

AND LOCK IN PLACE WHEN 

THE POOL IS NOT IN USE 

TO PREVENT DROWNING 

AND UNAUTHORIZED 

ENTRY.  

    WARNING

3/8 drill bit

Отзывы: