REV. 03/05/2020 PN:
PG:2
MANUFACTURER WARRANTY
1 year on step and ladder
1 year on hardware.
2257 route 139
Drummondville, Québec
J2A 2G2
WWW.INNOVAPLAS.COM
B
x8
1)
Slide the platform on the
flanged post.
2)
Insert the short 29.25" hollow
post, on the other side, through
the spacers and platform.
3)
Insert the two
small handrails
over the posts.
Don’t secure yet.
C
1)
Make sure to leave a
1/4" clearance between
the bottom spacer and
the top of the step.
Secure in place with
the screws provided.
2)
Measure 12"
between the two
spacers. Secure
in place with the
screws provided.
3)
Don’t secure
the platform yet.
x2 x2 x2
4)
Once inserted in the
spacers, use the 29.25"
hollow post as a pivot to
slide the flanged post
on the other side.
Drill two 5/16” holes.
12"
1/4"
MAJESTIC 8000 WITH CLASSIC LADDER 6004
G B C
D
D
1)
Insert the six Step Cups
TM
in
the holes under the step.*
x6
D2)
With a flat screwdriver, compress
the Step Cup mushroom ring while
pushing it into the hole.
CAUTION
D1)
Insert half of the Step Cup mushroom
ring in the hole, at a 45 degree angle.
D3)
Twist the Step Cup to ensure that
the mushroom ring has entirely cleared
the wall thickness. If it has, the suction
cup should rotate freely.
Failing to install the Step Cup
TM
system will greatly reduce the steadiness of the step and will void the
manufacturer warranty.
* View step cups installation tips on YouTube:
https://www.youtube.com/watch?v=W5RH1VNxpu0
E
Sand
15 LB
1)
Fill the ballast with sand. The
approximate weight should be 15
lbs.
2)
Screw the lid in place and
align the cover ribs with the
holes in the ballast base.
3)
Fasten the cover to the
ballast base with the four
screws provided.
x4
D
Align holes
5)
Secure the flanged post with the bolts,
washers and nuts provided.
5/16 drill bit
