Operating Manual
IP Telephone IP240
- 30 -
- 30 -
7.2. Direct
dialling
If direct dialling is switched on, a direct dialling number is dialled after picking up the
handset or pressing the Loudspeaker key.
1. In the initial state, press the following keys:
¾
Menu key
¾
Function key next to Phone Setup
¾
Function key beside Direct dial switches between "On" and "Off".
2. If you now press the function key next to Number, you can directly enter the call
number or name to be dialled.
3. If you press the function key next to Delay, the number or name is dialled after a
pre-defined time interval.
4. To set the function, press the Menu key twice, the “OK” message appears and
the telephone returns to initial state.
Note:
All keys on the IP telephone with the exception of the Menu key are then
locked.
Note:
When entering a name, remember that upper case and lower case letters are
considered to be different.
Note:
This function is only available if “Direct dial” is switched on.
