Operating Manual
IP Telephone IP200
- 31 -
- 31 -
7.3. Lock
1. In the initial state you can lock your IP telephone with the following keys:
¾
Menu
¾
Function key
next to Phone Setup
¾
Function key
next to Lock Phone
You are prompted to enter your
PIN
before you can lock your IP telephone
.
¾
Enter the PIN and press the Menu key
.
The message “Attention no emergency calls possible!” appears and the telephone
returns to its initial state. The active lock is indicated on the display by the
symbol.
2. The way to
unlock
your IP telephone is as follows:
¾
Press the Menu key
.
¾
Then enter the PIN.
¾
Finally press the Menu key
.
7.4. Change
PIN
The PIN is used to prevent unauthorised access. You can use this function to activate
the protection and specify the PIN. Proceed as follows to set the PIN:
¾
Press the Menu key
.
¾
Press the function key
next to Phone Setup.
¾
Press the function key
next to Change PIN and enter the current PIN.
¾
To enter the new PIN, press the function key
next to the New PIN field (upper
field).
¾
The new PIN must be re-entered for security reasons. This time, however, press the
function key
next to the lower New PIN field and re-enter your PIN.
¾
If you now press the Menu key
twice, the “Changes activated” message appears
and the telephone returns to its initial state.
Note:
There is no default PIN setting.