11
TEMP button
9
Introduction for buttons on remote controller
By pressing this button, you can see indoor set temperature, indoor ambient temp-
erature or outdoor ambient temperature on indoor unit’s display. The setting on
remote controlleris selected circularly as below:
no display
● When selecting " " or no display with remote controlle
r, temperature indicator
on indoor unit displays set temperature.
● When selecting " " with remote controlle
r, temperature indicator on indoor unit
displays indoor ambient temperature.
● When selecting " " with remote controlle
r, temperature indicator on indoor unit
displays outdoor ambient temperature.
Note:
●
Outdoor temperature display is not available for some models. At that time, indoor
unit receives " "
signal, while it displays indoor set temperature.
● It
’s defaulted to display set temperature when turning on the unit.There is no
display in the remote controller.
● Only for the models whose indoor unit has dual-8 displa
y.
● When selecting displaying of indoor or outdoor ambient temperature, indoor
temperature indicator displays corresponding temperature and automatically turn
X-FAN button
8
Press this button under cool and dry mode to start up x-fan function, and " " icon
on remote controller will be displayed. Press this button again to cancel x-fan
function, and " "
icon will disappea
r.
Note:
● When x-fan function is on, if the air conditioner is turned of
f, indoor fan will still
operate at low speed for a while to blow the residual water inside the air duct.
● During x-fan operation, press X-
FAN button to turn of
f x-fan function. Indoor fan
will stop operation immediately.
TURBO button
10
Under COOL or HEAT mode, press this button to turn to quick COOL or quick
HEAT
mode. " " icon is displayed on remote controlle
r. Press this button again
to exit turbo function and " " icon will disappea
r.
©2015 Innovair Corporation. All Rights Reserved.
www.innovair.com
