9
Introduction for buttons on remote controller
FAN button
4
Pressing this button can set fan speed circularly as: auto (AUTO), low( ), medium
( ), high( ).
Auto
Note:
● Under
AUTO speed,
● Fan speed under dry mode is low speed.
5
Press this button can select up&down swing angle. Fan blow angle can be selected
circularly as below:
● When selecting " ", air conditioner is blowing fan automatically
. Horizontal
louver will automatically swing up & down at maximum angle.
● When selecting "
、
、
、
、
● When selecting "
、
、
● Hold " "
button above 2s to set your required swing angle. When reaching your
required angle, release the button.
Note:
● "
、
、
" may not be available. When air conditioner receives this
signal, the
air conditioner will blow fan automatically.
button
no display
(horizontal louvers stops
at current position)
+/- button
3
● Press "+" or "-" button once increase or decrease set temperature 1
℃
.
Holding "+" or "-" button, 2s late
r, set temperature on remote controller will
tor on indoor unit will change accordingly. (Temperature can’t be adjusted under
auto mode)
● When setting
TIMER ON, TIMER OFF o
r CLOCK, press "+" or "-" button to
adjust time. (Refer to CLOCK, TIMER ON,
TIMER OFF buttons) When setting
TIMER ON, TIMER OFF or CLOCK, pre
ss "+" or "-" button to adjust time. (Refer
to CLOCK, TIMER ON, TIMER OFF buttons)
the IDU fan motor will adjust the fan speed (high, medium or
low speed) according to ambient temperature.
©2015 Innovair Corporation. All Rights Reserved.
www.innovair.com
