innovair RE05C1D1, Руководство по обслуживанию

Страница: 17 / 26

15

7 Installation details

7.1 Installation instructions.
Your air conditioner is designed to install in standard double hung windows with opening widths of 23
to 36 inches(584mm to 914mm) (See Fig.1).
Table 1
MODEL 5000~8000Btu/h 10000~12000Btu/h
SIZE 14 (356mm) 15-1/2 (394mm)
Lower sash must open sufficiently to allow a clear vertical
opening of following size (see Table 1).Side louvers and the
rear of the AC must have clear air space to allow enough
airflow through the condenser, for heat removal. The rear of
the unit must be outdoors, not inside a building or garage.
NOTE
: Save Carton and these Installation Instructions
for future reference. The carton is the best way to store unit
during winter, or when not in use.
TOOLS NEEDED:
Phillips Screw Driver
Drill(If pilot holes are needed)
CAUTION: When handling unit, be careful to avoid cuts from
sharp metal edges and aluminum fins on front and rear coils.
NOTE
: The top rail hardware and the following Fig.A, Fig.B
and Fig.C are not applicable to the units more than 10000Btu/h.
Before installing unit, the top rail must be assembled on the
unit (For <10000Btu/h models only).
Tool Needed: Phillips Screwdriver
A: Remove the air conditioner from the carton and place on a
flat surface.
B: Remove top rail from the rear of the packaging material as
shown in Fig. A
C: Align the hole in the top rail with those in the top of the
unit as shown in Fig.B
D: Secure the top rail to the unit with the 3/8 Screws as
shown in Fig.C.
NOTE
: For safety reasons, all four(4) screws MUST be
securely fastened.
Fig. B
Fig. C