Prompt:
When the power button is pressed to switch on the
radio, it should not exceed 2 seconds. Otherwise, it enters the
sleep state.
This device adopts 24-hour time system. After the battery is
installed, the clock will run from “12:00”.
1. At power-off state, if the indicator “ ”
for power-on by alarm is on the
display screen, press alarm setting
button (10) to cancel.
2. Press “time mode button” (10) once again
and the hour number flashed. At the state when the “hour”
number flashes, press “time adju button” (4) or “time
adjustment - button” (6) to set the hour.
Note:
1. when the hour is set, it must be set when the “hour” number
flashes.
2. When the minute is set, it must be set when the “minute” num-
ber flashes.
English User manual
CLOCK SETTING
flash time
adjustment
TIME SETTING FOR POWER-ON BY
ALARM
1. At power-off state, press “alarm
setting button” (10) and the indicator
for power-on by alarm “ ” and
time for power-on by alarm appear on the
flash time
adjustment