STORE STATIONS
English User manual
1. Use automatic and manual search to receive stations.
2. Hold down “station storage button” (11) and the indication for
station storage “PRESET” is displayed on the display screen and
the storage address flashes.
3. At the state when station storage address flashes, press
“storage a button” (13) or “storage address - button” (12)
to select storage address.
4. Select the saving address, press the band save button (11) to
confirm the saving address, then the band frequency will be
saved in the set address
Note:
1. Every band of the device may store 20 station and “0” is the
first station storage address.
If station frequency exists in the number from 0 to 19, new
frequency stored according to above method will overwrite the
old frequency. Prior to operation, the user should check whether
the selected station address has stations.
2. When the statio is stored, it must be stored under the condition
when the storage address flashes. Otherwise, it is invalid.
1. At power-on state, press band conversion button (4) to select
band.
2. Press storage a button (13) or storage address-button
(12) to select the stored station address. The radio will receive
TUNE OUT STORED STATIONS