Page 4 of 10
Edition 02/24/2016
INNOTECH
EAP QUAD-13
INNO
TECH
QUADRAT-13
APPLICATION
As anchorage point for
2 people
(including 1 person for first-aid administration) with personal
protective equipment EN 361 (safety harness) and EN 363 (fall arrest system).
STANDARDS
INNOTECH QUADRAT-13 has been tested and certified for installation on roofs in accordance with
EN 795 A.
The inspection was executed both statically and dynamically on the original substrate.
MATERIAL
INNOTECH QUADRAT-13 is made of coated steel and stainless steel, quality 1.4301
SIGNS AND MARKINGS
-
Type designation:
INNOTECH QUADRAT-13
-
Number(s) of the applicable standard(s):
EN 795:2012 A
-
Name or logo of the manufacturer/reseller:
INNOTECH
-
Manufacturer's serial number and year of manufacture:
xxxx / 20xx
-
Signs stating that the instructions specified in
the manual must be followed:
DIMENSIONS
[mm]
INNOTECH QUADRAT-13
∅
16 mm
Support heights: 300 mm, 400 mm, 500 mm, special lengths on request
Base plate thickness: 5 mm
ATTENTION
The INNOTECH QUADRAT-13 POST is suitable for absorbing high arrest forces in the event of a
fall, however the basic stability of
∅
16 mm posts is quite low; with posts exceeding 300 mm in
height deformations can occur. Consequently the roof sealing must be designed in such a manner
that it satisfies these requirements.
DEVELOPMENT and SALES
INNO
TECH
Arbeitsschutz GmbH
A-4656 Kirchham, Laizing 10
w w w . i n n o t e c h – s a f e t y . e u
