INNO
TECH
SAFETY SOLUTIONS
Arbeitsschutz GmbH
Edition 04/01/2007
SERVICE FORM
(COPY TEMPLATE - A4)
INSTRUCTIONS FOR
THE EXISTING SAFETY SYSTEM
The building owner must affix this notice in a conspicuous location near the access to the system:
This system must be used in accordance with the state of the art and in accordance with
the instructions for installation and use.
The storage location for the instructions for installation and use, inspection logs, etc. is:
•
Overview diagram showing the position of the anchorage devices:
(Draw in the areas where there is a break-through hazard!)
The maximum limit values of the anchorage devices are provided in the respective
instructions for installation and use or the rating plate of your system.
If there is strain caused by fall, or if in doubt, the anchorage device must be taken out of service immediately and sent to
the manufacturer, or to a specialised workshop for inspection and repair.
The same applies if there is damage to the anchorage equipment.
