Page 2 of 2
Edition 12/06/2010
BEF 401-12
COUNTER PLATE STABIL-12 / STA-12
INNO
TECH
FASTENING SET
BEF 401-12 COUNTER PLATE
SUBSTRATE: e.g.: STEEL GIRDERS
= Fastening set 401-12 for INNOTECH STABIL 12 (STA 12)
Fasten with
4 x M12 threaded rods:
The counter plate has the same dimensions
as the base plate of the post:
Always select the shortest possible
distance between holes.
(either 200 mm or 270 mm hole pattern)
Start by screwing 2 hex nuts each onto the 4 threaded
rods before countering them against each other at the
end of the threaded rod.
Use the counter plate to fasten the post as shown in
the figure on the right. Make sure that all 4 corner
bores are fitted with washers and the post is evenly
aligned on the steel girder.
DEVELOPMENT
INNO
TECH
Arbeitsschutz GmbH
A-4694 Ohlsdorf, Ehrendorf 4
w w w . i n n o t e c h . a t
