InnoMedia MTA8000 Series Administrative Guide
Page 54
Copyright © 2022 InnoMedia. All rights reserved.
1.
Check “Enable Trace Log”
2.
Trace Level menu, choose “LOG_DEBUG”
3.
Check “Trace Verbose”
4.
Configure
“Trace Channel” to be “0”
to monitor all ports of the system.
5.
Check whatever items to be monitored from the “Trace Group Setting” table.
Figure 47. Trace Log Setting
Trace Log Setting
Description
Enable Trace Log
Enables the trace log.
Trace Level
Follows RFC5424 syslog message severities.
1 Alert: Action must be taken immediately
2 Critical: Critical conditions.
3 Error: Error conditions.
4 Warning: Warning conditions.
5 Notice: Normal but significant condition.
6 Informational: Informational messages.
7 Debug: Debug-level messages.
Additional Messages available:
LOG_STACK -- Network protocol related
messages.
LOG_DSP -- RTP traffic related messages.
