InnoMedia MTA8000 Series Administrative Guide
Page 63
Copyright © 2022 InnoMedia. All rights reserved.
•
Excellent
Solid Green
•
Good
Alternates between solid yellow and solid green.
•
Not Good
Solid yellow
Model MTA8328-1N / MTA8338-1N
LEDs
Blinking State
MTA State
PWR
Steady Green
Powered ON.
Off
Powered OFF.
WAN
Solid or Blinking Green
WAN Ethernet 100BT link is active, blinks with activities.
Solid or Blinking Yellow
WAN Ethernet 10BT link is active, blinks with activities.
Off
WAN Ethernet link is not connected.
Fast Blinking Green
(0.25 secs on, 0.25 secs
off)
WAN Ethernet 100BT link is active but is unable to reach the
Internet.
Fast Blinking Yellow
(0.25 secs on, 0.25 secs
off)
WAN Ethernet 10BT link is active but is unable to reach the
Internet.
Medium-Slow Blinking
Green (1 sec on, 1 sec off)
Device firmware is being upgraded. The PHONE LED blinks in
unison with the WAN LED.
LAN
Solid Green
LAN Ethernet 100BT link is active, blink with activities.
Solid Yellow
LAN Ethernet 10BT link is active, blinks with activities
Off
LAN Ethernet link is not connected.
PHONE
Off
- No power, OR
- Device is initializing, OR
- Failed to register for voice services, OR
- Line is disabled.
Steady Green
The device is ready to make calls.
Slow Blinking Green (3
secs on, 1 sec off)
There are new voicemail messages.
Medium-Fast Blinking
Green (0.5 secs on, 0.5
secs off)
The device is registered and ready to make calls, and the line is in
use.
Fast Blinking Yellow (0.25
secs on, 0.25 secs off)
The device has failed FEM/HAZ online diagnostic (GR909) test. LED will
return to its previous state after the fault has been removed.
Medium-Slow Blinking
Green (1 sec on, 1 sec off)
Device firmware is being upgraded. The PHONE LED blinks in
unison with the WAN LED.
