26
DHCP~ Turn
ON
for the VideoPhone to assign a dynamic IP
settings to PC LAN devices (e.g. PC)
LAN IP Start~
The first IP address within the range of LAN setting
LAN IP End~
The last IP address within the range of LAN setting
IP Lease Time~
The duration for LAN devices to assume the LAN settings
assigned by the VideoPhone
Wireless Settings
Fields Remarks
ESSID
This setting is required in the signalling process with the
wireless access point. Configure the same ESSID as that
found in the corresponding access device
Enabled WEP
As a security protocol, WEP provides the encryption in
media transmission. Select
ON
to enable and
OFF
to
disable encryption
Password Type
The setting defines the type of key require to encrypt and
decrypt the packets. Hex characters range from 0-9 and A-
F (case sensitive) while Ascii characters range from 0-9,
A-Z (case sensitive) and standard Ascii symbols
Password Length Selectable settings between 128 bits (32 characters) and
64 bit (16 characters)
Password
Configure the key that VideoPhone requires in the
encryption/decryption of packets during media
transmission with the access point
Voicemail Settings
Fields Remarks
Voicemail Turn
ON
to enable incoming voice call from PSTN line be
diverted to a voicemail on the Vfone
VM Auto answer ’ Assign the number of rings (3 rings, 4 rings, 5 rings, 6
rings, 7 rings) require on the Vfone from an incoming
PSTN call before diverting the call to the voicemail
function
