28
Product Approval Information
1. FCC PART 68 INFORMATION
This equipment is Hearing Aid Compatible.
This equipment complies with Part 68 of the FCC Rules and the requirements adopted by ACTA. On the bottom of
this equipment is a label that contains, a product identifier in the format US:AAAEQ##TXXXX. If requested, this
information must be provided to your telephone company.
A plug and jack use to connect this equipment to the premises wiring and telephone network must comply with the
applicable FCC Part 68 rules and requirements adopted by ACTA. A compliant telephone cord and modular plug
is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant.
See installation instructions for details.
The REN is used to determine the number of devices that may connect to a telephone line. Excessive RENs on a
telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the
sum of the RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a
line, as determined by the total RENs, contact your local telephone company. For product approved after July 23,
2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The
digits represented by ## are the REN without the decimal point (e.q., 03 is a REN of 0.3). For earlier products, the
REN is separately shown on the label.
If this equipment MTA 5XXX-XYX IP VideoPhone(where X= any number 0-9 and Y= any alphabet A-Z) causes
harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance
of service may be required. But if advance notice is not practical, the telephone company will notify the customer
as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is
necessary.
The telephone company may make changes in its facilities, equipment, operations or procedures that could affect
the proper functioning of your equipment. If they do, you will be notified in advance in order for you to make
necessary modifications to maintain uninterrupted service. If trouble is experienced with this unit, for repair or
warranty information, please contact customer service at the address and phone listed below. If the equipment is
causing harm to the network, the telephone company may request that you disconnect the equipment until the
problem is resolved.
DO NOT DISASSEMBLE THIS EQUIPMEN
T. It does not contain any user serviceable components.
We recommend the installation of an AC surge arrester in the AC outlet to which this equipment is connected.
Telephone companies report that electrical surges, typically lighting transients, are very destructive to customer
terminal equipment connected to AC power sources.
Attn: Customer Service Dept
InnoMedia, Inc.
186 Topaz Street
Milpitas, CA 95035-5429
Tel: (408) 432-5400
Fax: (408) 432-5404
II. FCC DECLARATION OF CONFORMITY
PRODUCT NAME:
Multifunctional Telephone with IP Videophone
MODEL NUMBER:
MTA 5XXX-XYX
(where X= any number 0-9 and Y= any alphabet A-Z)
FCC RULES:
TESTED TO COMPLY WITH FCC PART 15, CLASS B
OPERATING ENVIRONMENT:
FOR HOME OR OFFICE USE
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
