8
III.
Installation
Below is an illustration of the back panel of the MTA 5410 IP VideoPhone.
Figure 3.1 MTA 5410 IP VideoPhone back panel
On the back of your MTA 5410 IP VideoPhone,
1.
Connect from the
WAN
port to the broadband modem (if any) by using a
RJ45 Ethernet cable
2.
Plug the power adapter^ into the
12VDC 1.5A
power connector
3.
Switch on the MTA 5410 IP VideoPhone
4. The
POWER LED
(green) will light up while your VideoPhone starts to
boot up and conducts a series of diagnostic tests
5.
Once the boot-up process is completed, the LCD screen will display a
self-view
^ Check that you have the correct power rating for your power adapter
