Innomed Medical TOP-X 100NR Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 46

background image

TOP-X100NR USER MANUAL

Innomed Medical Inc.

36

Burst – Digital storage of 10 images.

Rapid – Continuous digital image storage. In this and in the previous mode,

the image creation frequency appears next to the symbol.

The following line contains the accumulated fluoroscopy time.

To the left in the bottom row is the magnification factor. To the right is the symbol
indicating ABS active state. In the center are the different fluoroscopic mode states:

Continuous fluoroscopy
Impulse fluoroscopy. In this operating mode the impulse frequency appears

under the symbol.

8.5.2 Setting fluoroscopy x-ray voltage (kV)

You can set this value on the control panel with the soft buttons next to the fluoro kV.
Use + (13) button next to the symbol to increase the value, and – (14) to decrease it.
Continuously holding the buttons changes the value within the allowed limits in 1kV
steps.

8.5.3 Setting fluoroscopy x-ray current (mA)

You can set this value on the control panel with the soft buttons next to the fluoro
mA. Use + (19) button next to the symbol to increase the value, and – (20) to
decrease it. Continuously holding the buttons changes the value within the allowed
limits in 0.1mA steps

8.5.4 Fluoroscopy time

The clock on the display indicates fluoroscopy time, and only operates when x-ray
emits from the tube. The timer can be reset with the soft button (8) next to the timer
reset symbol. When exceeding the “beep time” value set in the install program during
installation, the control panel warns with a continuous sound that fluoroscopy
duration is nearing what is dangerous to patient health. When reaching the allowed
maximum fluoroscopy time (also set in the install program), the generator
automatically disables the x-ray. The examination can continue only when
fluoroscopy timer is reset.

8.5.5 Zoom

You can access the image intensifier’s zoom functions with this parameter. You can
select among normal and max. four magnified image displays. During magnification
fluoroscopy current is automatically multiplied. To do this, enter fluoroscopy
parameter setting with the “More options” soft button (12).

The following screen appears:

«
...
34
35
36
37
38
...
»

Содержание TOP-X 100NR















































Отзывы:

Нет отзывов

Похожие инструкции для TOP-X 100NR

Бренд: Feider Machines Страницы: 36

Бренд: Bang & Olufsen Страницы: 213

Бренд: Generac Power Systems Страницы: 2

Бренд: Xantrex Страницы: 36

Бренд: VOLTCRAFT Страницы: 50

Бренд: Baofeng Страницы: 34

Бренд: Hytera Страницы: 27

Бренд: Abbott Страницы: 80

Бренд: Powermate Страницы: 16

Бренд: Coby Страницы: 1

Бренд: Panasonic Страницы: 22

Бренд: Motorola Страницы: 55

Бренд: Motorola Страницы: 20

Бренд: Motorola Страницы: 4

Бренд: Motorola Страницы: 15

Бренд: Motorola Страницы: 21

Бренд: Motorola Страницы: 4

Бренд: Motorola Страницы: 96

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды