21
2. Use the same procedure from the lowest part of the head to the highest, as in
the image. Then pass the hair clipper in the opposite direction to the growth of
the hair, from the forehead to the central part and equalize the cut at the level
of the lateral part.
3. To achieve a “flat top” look the hair at the top should be cut using a flat comb
and not the supplied guide comb.
4. Use a short comb to blend the hair near the neck as desired. Comb the hair and
check that the cut and the shading are uniform as described above.
CLEANING AND MAINTENANCE
Always turn off the appliance before cleaning the product. After using the product,
remove the combs from the appliance, remove the residual hair with the brush
and then wash under running water. Let it dry well before using the appliance
again. Never immerse the product in water. Clean the product externally with a
soft, slightly damp cloth. Never use solvents or abrasive products.
ATTENTION: never let water enter the motor body, always keep the part of the
blades down when cleaning the head. Wait for the accessory to dry before putting
the appliance back into operation.
GB
Pic.8
