20
STEP 4 - TOP OF THE HEAD
1. Using the 9 mm or 12 mm comb, start cutting from the center of the hair to the
forehead, on the opposite side of the hair growth (picture 4). In some cases, it
may be useful to cut in the opposite direction, or cut from the forehead towards
the center of the head.
2. If you want a fairly short cut, use a 3mm or 6mm comb.
3. To leave the hair longer at the top, hold the hair upwards using the comb provided,
and pass the hair clipper over the comb to cut it, or hold the hair between your
fingers and cut to the desired length (pictures 5 and 6). Always start from the
back of the head. To obtain a more nuanced cut, the space between the fingers
/ guide comb and the head can be reduced. Comb your hair and check that the
cut is even.
STEP 5 - THE FINAL TOUCH
1. Finally, use the clipper without applying the guide combs for the final cut, near
the neck and ears.
2. To get a clean cut around the sideburns, turn the clipper to the opposite side
(image 7)
3. Press the blades lightly onto the skin and cut down to finish some parts, resulting
in a clean cut as with the razor.
SHORT AND SHADED LOOKS
1. Start with the 12mm comb, cutting from the back to the center. Keep the guide
comb pressed parallel to the head and slowly move through the hair, as shown
in picture 8.
GB
Pic.4
Pic.5
Pic.6
Pic.7
