Innohome Stove Guard SGK5010, Инструкция по установке и эксплуатации

Страница: 16 / 24

READ BEFORE
Avoiding false alarms
Use a pan that covers the entire hotplate to prevent
false alarms. Using a lid is recommended.
Always use the cooker hood if you have one.
If you have a freestanding cooker or an oven under
the hob, the oven controls must also be turned off
once the power supply to the cooker or hob has been
switched off by the alarm.
After alarm
Mechanical controls
If the Stove Guard has turned the cooker off, first turn
all cooker controls to ‘0’, then press the Heat Sensor
button once. After this, the cooker can be used nor-
mally. With ceiling installation, reset button is needed
to return the power.
Touch controls
If the Stove Guard has turned the cooker off, press the
Heat Sensor button once. After this, the cooker can
be used normally.
In some cases you must wait until the cooker has
cooled down to continue to use.
Dislocation alarm
Removing the Heat Sensor from the installation plate
cuts off the power to the cooker. Returning the
Sensor back to the installation plate returns the
power to the cooker. Press the Heat Sensor button
once.
U S E R G U I D E
16