Innodisk InnoAGE M.2 (S80) 3TI7, Руководство пользователя

Страница: 23 / 34

InnoAGE TM M.2 (S80) 3TI7
23 V1.2 TPS, July., 2020
the customer to use/test encryption functions.
3.12.3 Authorized Key Management (Optional)
In order to complete the physical security layer of protection, encryption needs to be bundled
with an ATA user password provided by an ATA Security command. Unlike the AES key, the
authorized key must be set by the user via the BIOS configuration. Every time you power on the
system with SSD encryption, a password request prompt is sent to access the SSD. If the
password is correct, the SSD will run well; if not, you will not be able to access the SSD.
Command Command Code
SECURITY SET PASSWORD 0XF1
SECURITY UNLOCK 0XF2
SECURITY ERASE PREPARE 0XF3
SECURITY ERASE UNIT 0XF4
SECURITY FREEZE LOCK 0XF5
SECURITY DISABLE PASSWORD 0XF6
3.12 FW Recovery Function* 1
InnoAGE SSD has one drive partition dedicated to recovery, meaning that recovery image for the
device OS is available at all time. User can set a partition to install backup*
1 image in advance.
While the master boot-up area is crashed, the recovery command would designate the partition
with backup image to recovery the mast boot-up partition. When the execution of recovery is
finished, FW will send the PC reset
*2 command to the system automatically. This function can be
triggered remotely through both in-band and out-of-band channels to rapidly restore edge system.
It is independent OS and platform to recovery system due to LBA movement.
*1. The implementation of recovery and backup can refer to user guide of APP tool.
*2. User MUST to connect the PC reset pin to the pin header 1 of InnoAGE SSD (See table 9).