Innodisk InnoAGE M.2 (S80) 3TI7, Руководство пользователя

Страница: 12 / 34

InnoAGE TM M.2 (S80) 3TI7
12 V1.2 TPS, July., 2020
2.4.4 Mean Time between Failures (MTBF)
Table 7 summarizes the MTBF prediction results for various INNOAGE M.2 (S80) 3TI7
configurations. The analysis was performed using a RAM Commander
™ failure rate prediction.
‧
Failure Rate : The total number of failures within an item population, divided by the total
number of life units expended by that population, during a particular measurement interval
under stated condition.
‧
Mean Time between Failures (MTBF) : A basic measure of reliability for repairable items:
The mean number of life units during which all parts of the item perform within their specified
limits, during a particular measurement interval under stated conditions.
Table 7: InnoAGE M.2 (S80) 3TI7 MTBF
Product Condition MTBF (Hours)
Innodisk InnoAGE M.2 (S80)
3TI7
Telcordia SR-332 GB, 25°C >3,000,000
2.5 CE and FCC Compatibility
InnoAGE M.2 (S80) 3TI7 conforms to CE and FCC requirements.
2.6 RoHS Compliance
InnoAGE M.2 (S80) 3TI7 is fully compliant with RoHS directive.
2.7 Reliability
Table 8: InnoAGE M.2 (S80) 3TI7 TBW
Parameter Value
Read Cycles Unlimited Read Cycles
Flash endurance 3,000 P/E cycles
Wear-Leveling Algorithm Support
Bad Blocks Management Support
Error Correct Code Support
TBW* (Total Bytes Written) Unit: TB
Capacity Sequential workload Client workload
32GB 84.3 37.5
64GB 168.6 75
128GB 337.2 150
256GB 674.4 250
512GB 1348.8 500
* Note:
1. Sequential: Mainly sequential write, tested by Vdbench.
2. Client: Follow JESD218 Test method and JESD219A Workload, tested by
ULINK. (The capacity lower than 64GB client workload is not specified in
JEDEC219A, the values are estimated.)
3. Based on out-of-box performance.