![Innodisk 3TR6-P Series Скачать руководство пользователя страница 37](http://html1.mh-extra.com/html/innodisk/3tr6-p-series/3tr6-p-series_manual_2062491037.webp)
2.5” SATA SSD 3TR6-P
37
V1.8 TPS, Aug., 2022
4. Installation Requirements
4.1 2.5” SATA SSD 3TR6-P Pin Directions
Figure 3: Signal Segment and Power Segment
4.2 Electrical Connections for 2.5” SATA SSD 3TR6-P
A Serial ATA device may be either directly connected to a host or connected to a host through a
cable. For connection via cable, the cable should be no longer than 1meter. The SATA interface has
a separate connector for the power supply. Please refer to the pin description for further details.
4.3 Form Factor
Please prepare following things:
Screw driver.
Four M3 screws. (Torque value is 3.0 Kgf.cm)
SATA single cable (7-pin, Maximum length l meter).
SATA power cable (15-pin).
Please turn off your computer, and open your computer’s case. Find one of available 2.5-inch slot,
and plug the SSD in. To use the screws fix the SSD. Plug in the SATA single cable, and power cable.
Please boot the installation Operation System from CD-ROM, and install Operation System into
SSD.