2.5” SATA SSD 3TR6-P
12
V1.8 TPS, Aug., 2022
2.4.4 Mean Time between Failures (MTBF)
Table 7 summarizes the MTBF prediction results for various 2.5” SATA SSD 3TR6-P configurations.
The analysis was performed using a RAM Commander
™
failure rate prediction.
‧
Failure Rate: The total number of failures within an item population, divided by the total
number of life units expended by that population, during a particular measurement interval
under stated condition.
‧
Mean Time between Failures (MTBF): A basic measure of reliability for repairable items:
The mean number of life units during which all parts of the item perform within their specified
limits, during a particular measurement interval under stated conditions.
Table 7: 2.5” SATA SSD 3TR6-P MTBF
Product
Condition
MTBF (Hours)
Innodisk 2.5” SATA SSD 3TR6-P
Telcordia SR-332 GB, 25°C
>3,000,000
2.5 CE and FCC Compatibility
2.5” SATA SSD 3TR6-P conforms to CE and FCC requirements.
2.6 RoHS Compliance
2.5” SATA SSD 3TR6-P is fully compliant with RoHS directive.
2.7 Reliability
Parameter
Value
Flash endurance
3,000 P/E cycles
Error Correct Code
Support
Data Retention
Under 40
˚C:
10 Years at Initial NAND status (PE cycles under
100)
；
1 Year at NAND Life End (PE cycles reach 3,000)
TBW* (Total Bytes Written) Unit:TB
Capacity
Sequential workload
Client workload
128GB
341
289
256GB
682
578
512GB
1364
1154
1TB
2663
2308
2TB
5327
4615
*Note:
1. Sequential: Mainly sequential write are estimated by PassMark Burnin Test v8.1 pro.
2. Client: Follow JESD218 Test method and JESD219A Workload, tested by ULINK. (The capacity lower than 64GB
client workload is not specified in JEDEC219A, the values are estimated.)
3. Based on out-of-box performance.
