63
INNOCIGS CUBOID TAP – REGULATING THE POWER OUTPUT & TEMPERATURE
INNOCIGS CUBOID TAP – EXPLANATIONS TO THE VAPING MODES
VW Mode (Variable Wattage)
The VW mode supports vaporizer heads in a resistance range of 0.1 ohm to 3.5 ohms. The power which is delivered to
the atomizer head can be regulated by adapting the voltage according to the power specification.
TC/TEMP Mode (Temperature Control | Variable Wattage)
In TC-Ni, TC-Ti and TC-SS modes, the device supports heads with coils made of nickel (Ni200), titanium (Ti), and
stainless steel (SS316) with a resistance of 0.05 ohm to 1.5 ohms. The temperature can range between 100°C and 315°C
or 200°F and 600°F in TC/TEMP mode, depending on the vaporizer head being used.
TCR Mode (Temperature Coefficients of Resistance)
In TCR mode (M1, M2, M3), the device supports head coils made of nickel (Ni200), titanium (Ti), nickel iron (NiFe), and
stainless steel (SS303 - 316) with a resistance range of 0.05 ohm to 1.5 ohms. Depending on the atomizer head used,
the temperature can range between 100°C and 315°C or 200°F and 600°F in TCR mode. This mode allows you to select
different temperature coefficients of the wire or to operate with different TCR values.
Please note that the resistance of the vaporizer head used must be set before it is first used in TC/TCR mode.
