3. C
ONFIGURING
Y
OUR
C
OMPUTER
Before you can use your Innoband 8012-G1, you need to configure your computer properly to
reflect the networking environment set by your DSL Service Provider. This chapter provides you
with instructions on how to configure your Innoband 8012-G1 network and how to configure your
Internet setting using Innoband User Interface.
1)
Windows 2000
2)
Windows XP
3) Innoband User Interface
Before you begin configuring your computer, ensure that:
1.
Your DSL service provider has provided you the IP address, Subnet mask, Gateway
address, and DNS address. However, if your service provider uses Dynamic Host
Configuration Protocol (or Dynamic IP address), you will not be provided with any such
information.
2. To configure the computer connected to the Ethernet port of Innoband 8012-G1, ensure
that your computer has a Network Interface Card (NIC) and it is functioning proper
Configuring your computer
24