6
VIEW 5 Pro
730
VIEW
Local / Lock combination key - lock / forcibly disconnect remote connection
Function 1: When there is no remote connection, pressing the Local/Lock key for a long time can lock or unlock the key.
(Same as Section 9.4)
Function 2: When there is remote connection, the remote connection is forcibly disconnected.
Pressing the Local/Lock combination key for a long time can only disconnect the remote control function, not lock or
unlock the function.
Start / Stop key - integral measurement execution key
Pressing this key can control the start and stop of key.
Set / Reset key - integral setting key
When the integral does not run or is running, it can call up the setting menu of integral mode, integral timer and rated
integral time. When the integral stops, it can reset the integral value and time.
Setup key - setting key
Pressing this key can call up the following setting menus: measurement mode, scaling function, sensor input scaling,
synchronization source, line filter, frequency filter, data update rate, average function, operation function, maximum hold
function, saving configuration file and loading configuration file, etc.
Utility key - system setting key
Pressing this key can call up the following setting menus: display system information (model information, suffix code,
instrument serial number and firmware version), initialization setting, display digit setting, peak factor setting, storage
setting, D/A output setting, zero level compensation setting, zero setting, communication setting and self-test.
Harmonics key - harmonic setting key
Pressing this key can enter harmonic settings, which can set whether harmonic display is turned on, harmonic number,
PLL source and THD formula. When the harmonic display is turned on, the Harmonics key and the lower harmonic display
indicator light are on at the same time; when the harmonic display is turned off, the key and indicator light go out at the
same time.
Key name
Function specifications
Remarks
Up and down keys
1. Switch setting options
2. When setting a value, pressing the up key can increase the value, while pressing the down
key can decrease the value
Right key
1. Move the setting bit of a value to the right (or return to the leftmost from the rightmost)
2. Switch setting items to the right in the menu, such as DA/SET menu
Left key
1. Move the setting bit of a value to the left (or return to the leftmost from the rightmost)
2. Switch setting items to the left in the menu, such as DA/SET menu
No decimal point
3. Move decimal point position
(The decimal point moves from left to right, or from the rightmost to the leftmost.)
With decimal point
OK key
Determine options or perform actions
Navigation key
