Inno home Stove Guard 300, Руководство пользователя

Страница: 10 / 20

6
Stove Guard 300 User Manual
Sound Meaning Course of Action
Control Unit: two short
beeps (after turning the
Safety Lock off)
The Safety Lock has been turned off and the
electricity reconnected to the cooker.
The cooker can now be used.
Control Unit: a signal every
hour or half hour There has been an error in the identification
of the cooker.
Repeat the setup procedure as described
in section 10 under the heading ‘the Con
-
trol Unit signals every hour or half hour’.
Intelligent Heat Sensor (and
the Control Unit): a signal
once a minute
The Intelligent Heat Sensor has a low battery. Replace the battery, see section 3. Pushing
the push-button on the Intelligent Heat
Sensor once will delay the battery alarm
for 12 hours.
A low battery in the Intelligent Heat Sensor causes both the Intelligent Heat Sensor and the Control Unit to emit a signal
once a minute. The battery alarm can be postponed for 12 hours by pushing the Intelligent Heat Sensor push-button once.
The Control Unit will carry on emitting the battery alarm signal after the Intelligent Heat Sensor battery has been changed
(or after it has run out). Reset the Control Unit battery signal by turning the cooker electricity off and then back on using the
cooker switch/the main switch. In gas cookers, turn the power of the Control Unit off, using the main switch or the socket
switch. Empty battery in the Intelligent Heat Sensor does not effect the safety features of the Control Unit.
Unscrewing the screw on the bottom of the Sensor (2) (see picture in section 4) opens the cover for changing the battery.
Use CR2032 type batteries.
3. Low battery alarm
2. Monthly Maintenance
Electrical cookers: Since the automatic fault diagnostics tests various parts of the Stove Guard every time a hotplate is
turned on, only the Alarm Signal Detection feature needs to be tested on a monthly basis. For the Alarm Signal Detection
test, refer to the section 6.1.
Gas/dual-fuel cookers: Refer to the gas kit manual.
Clean the Intelligent Heat Sensor by wiping it with a cloth dampened with a mixture of household detergent and water.
Only use a cloth that does not leave fibres.
Ensure that the batteries are good for all other alarms being used with your Innohome Stove Guard and that the alarms are
cleaned according to their instructions.
1. Innohome Stove Guard and how to use it