Inno Essentials Silk'n REVIT PRESTIGE ND9002, Руководство пользователя

Страница: 30 / 173

EN
29
7. Cleaning and maintenance
NOTICE! RISK OF DAMAGE!
• Always turn off and unplug the device
before cleaning or replacing the spare parts.
• Never immerse the device or any parts in
water or other liquids. Make sure that no
water or other liquids penetrate the housing.
• Do not use any aggressive cleaners, brushes
with metal or nylon bristles, or sharp or
metallic cleaning utensils such as knives, hard
scrapers and the like.
7.1 Cleaning the housing and the charging cradle
1. Wipe the device
1
and the charging cradle
7
(avoid
contacting the pin of the charging cradle or the hole on the
bottom of the device) with a damp cloth.
2. Wipe it completely dry with a dry cloth.
7.2 Cleaning the tip
1. Remove the tip (
8
/
9
/
10
/
11
) from the device and
gently clean its inner side with the brush 16 after each use to
remove dead skin cells and debris.
2. Wipe the outside of the tips thoroughly with a damp cloth.
3. Let it dry completely.
7.3 Replacing the filter
The filter should be replaced regularly for optimal results. Always
make sure that the filter is in place to prevent particles such as
dead skin cells or debris from entering the motor.
1. Gently remove the tip (
8
/
9
/
10
/
11
) and discard the
filter
14
.
2. Replace with a new filter and put the tip back into place.
7.4 Replacing the O-ring
The O-ring should only be replaced if it is damaged or worn.
Always make sure that the O-ring is in place, otherwise the device
will not work properly.