12
Integriti.
Integriti.
Integriti.
Integriti.
Integriti.
Revision 3.1 June 2014.
Turning Area/s OFF.
Logon to the Terminal as described earlier.
(PIN code + <OK>)
After the greeting (if enabled), the display shows
the Area Status etc. as before. The currently
selected Area is highlighted. To select another
Area see “AREA SELECTION” below.
After selecting an Area that is currently On, turn
the displayed Area (or Area List) OFF by pressing
the <OFF> key.
The icon and text colour will alter accordingly to
indicate that the operation was successful.
-AREA SELECTION.
You may select other Areas by using the SCROLL
WHEEL or the <UP> / <DOWN> Arrow keys.
Once you have Logged on to a Terminal, and can view the Area status, you may perform
the Area OFF or ON operations.
Remember:
You have a limited time to turn an Area OFF once you have entered the
Area (Usually 30-90 seconds). Ask the Installer for the Entry time used in your system.
NOTE: Quick Arm/Disarm.
Your system may be configured to allow a nominated
Area to be controlled simply by entering your PIN code, then the OFF or ON key.
i.e. OK key not required.
-
,
Admin
Area Control
Admin
Sales Counter
Warehouse
Board Room
Training Room
Menu
OK=Off Area Lists
or
