7
Connecting the STB
You need:
The home gateway unit
Ethernet RJ-45 UTP cable
STB unit
1.
Plug one end of the Ethernet cable to one of the six ports on the home gateway as shown in the
picture (
LAN 1
,
2
,
3
,
4
,
5
or
6
).
2.
Plug the other end of the Ethernet cable to the ethernet port on your STB device.
When the home gateway is turned on and your STB connected, observe the
Data
light indicator. The light
is on uninterruptedly or occassionally blinks. If you have properly connected the STB device to your TV
set, you can start using the IPTV and video services immediately.
Note: Your STB device may differ from the sample device in this picture. The picture
shows only how to connect a STB device to your home gateway. For instructions on
how to power-on your STB and how to connect it to your TV set, please refer to the user
documentation that came with your STB device.
Note: The ports can be pre-configured for specific service - data (PC) or video (TV). You
will obtain this information from your service provider, then plug your device to the
designated port accordingly.
