6
Connecting the PC
You need:
The home gateway unit
Ethernet RJ-45 UTP cable
1.
Plug one end of the Ethernet cable to one of the six ports on the home gateway as shown in the
picture (
LAN 1
,
2
,
3
,
4
,
5
or
6
).
2.
Plug the other end of the Ethernet cable to the ethernet port on your PC.
When the home gateway is turned on and your PC connected, observe the
Data
light indicator. The light is
on uninterruptedly or occassionally blinks.
Note: The ports can be pre-configured for specific service - data (PC) or video (TV). You
will obtain this information from your service provider, then plug your device to the
designated port accordingly.
