INNACOMM W3100V, Руководство пользователя

Страница: 109 / 133

108
you can select Auto to have the Router automatically use the fastest
possible data rate and enable the Auto-Fallback feature. Auto-Fallback will
negotiate the best possible connection speed between the Router and a
wireless client. The default value is Auto .
=
Basic Rate: Select the basic transmission rate ability for the AP.
=
Fragmentation Threshold: Packets that are larger than this threshold are
fragmented into multiple packets. Try to increase the fragmentation threshold
if you encounter high packet error rates. Do not set the threshold too low,
since this can result in reduced networking performance.
=
RTS Threshold: This value should remain at its default setting of
2347.Should you encounter inconsistent data flow, only minor reductions are
recommended. Should you encounter inconsistent data flow, only minor
reduction of the default value, 2347, is recommended. If a network packet is
smaller than the preset RTS threshold size, the RTS/CTS mechanism will not
be enabled. The Router sends Request to Send (RTS) frames to a particular
receiving station and negotiates the sending of a data frame. After receiving
an RTS, the wireless station responds with a Clear to Send (CTS) frame to
acknowledge the right to begin transmission. The RTS Threshold value
should remain at its default value of 2347.
=
DTIM Interval: (Delivery Traffic Indication Message) Enter a value between 1
and 255 for the Delivery Traffic Indication Message (DTIM.) A DTIM is a
countdown informing clients of the next window for listening to broadcast and
multicast messages.
=
Beacon Interval: Beacon is a packet of information that is sent from a
connected device to all other devices where it announces its availability and
readiness. A beacon interval is a period of time (sent with the beacon) before
sending the beacon again. The beacon interval may be adjusted in
milliseconds (ms). Default (100) is recommended.
=
Global Max Clients: Specifies maximum wireless client stations to be enble
to link with AP.
=
XPress
™
Technology: Select Enable or Disable. This is a special
accelerating technology for IEEE802.11g. The defaule is Disabled.
=
54g
™
Mode: Compatible with IEEE 802.11b, IEEE 802.11g. Select a
Standards from the drop-down list box. Its default setting is 54g Auto. The
drop-down list box includes below mode.