INMOVEMENT DYNAMIC DESK, Руководство по эксплуатации

Страница: 21 / 34

20
13
Press and hold the Lower Desktop Height Down Arrow key until the desktop reaches the lowest
position. Release. Press and hold the Lower Desktop Height Down Arrow for 5-10 seconds. The
desk will automatically run approximately 5 mm out again and then slowly in again. Only release
the Lower Desktop Height Down Arrow key when the movement has completely stopped.
If the Lower Desktop Height Down Arrow key is released before the sequence is complete then
the initialization is interuppted and must be restarted from the beginning.
It may be necessary to press the Lower Desktop Height Down Arrow key twice to start the initial-
ization because the system can be in different modes when the initialization starts. Expect a 1.25
second delay. If an error situation occurs at the end stop positions or the desktop height has to
be initialized again.
The first two times the system runs into the outward end stop, it will automatically run approxi-
mately 3 mm back in inward direction.
Approximately 5 mm
Initialize Actuators
C
Turn Power ON
B
A