INMES Industrial Ltda – IM-30 MM
5
•
Keep the saw blade clean;
•
Keep work area around clean, sawdust can
make the floor slippery;
•
Make sure there is no debris between the
work piece and the fence;
•
Never cut more than one work piece at a
time;
•
Anytime the saw blade is removed for
replacement or maintenance; make sure
that the machine is unplugged from the
wall socket;
•
After replacing make sure the blade is
properly tight;
•
Keep visitors and children away when using;
Note: Always remember that careless fraction
of a second is enough to cause a severe injury
1.7 – Plan your cut
•
Make sure the machine has enough cutting capacity to cut the profile you wish to;
•
Use appropriate blade for cutting, depending on the type of material to be cut ( wood or plastic);
•
When cutting the profiles with rabbet, the rabbet must be facing the operator as figure 01 (F).
1.8 – Protection:
•
Do not wear loose clothing, gloves or jewelry, neckties. They can caught you and draw you against the
moving parts;
•
Tie back long hair;
•
Wear ear plugs or muffs;
•
Always wear safety goggles;
•
For dusty operations, wear a dust mask along with safety goggles;
•
Always remember that a fraction of a second can cause a serious injury.
Tip:
!
When you have a large quantity of profiles to be cut, and you want to do this in a quick way, we advice the
operator to cut first one side, and then the other side. It means rapidity and will save your time, for it’s
not necessary to move the blade position several times.
3 /8 ”
A
B
Right
Wrong
C
D
Rabbet facing the operator
E
F
profile
scrap piece
Figure 01
Wrong
Right
Wrong
Right
scrap piece
profile
