Page 23 of 41
iFleetONE™ Terminal Installation Manual
Put the antenna unit on the mounting flange and use 6 sets of M6 x 35 Hex head
bolts (made of A4 stainless steel) with flat washers into the threaded holes of the
antenna unit’s mounting base via the mounting flange holes.
Tighten the bolts to the antenna unit in order to secure it to the mounting flange.
Alternatively it can be mounted on the long pole. The physical dimension of a long pole shall
be preferably 2 meters in height with a diameter of Ø35 to Ø50mm. In addition, the optional
pole mount kit is available for the installation of the antenna unit onto the long post.
1.6 Installation of the BDU
Unpack the BDU box. The following items should be checked as to whether they are present:
BDU
1 x Ethernet Cable
1 x DC Power Cable
1 x Inmarsat 505 laminated card
1 x Wi-Fi Antenna
Hardcopy Quick Start Guide
CD ROM (Soft User Manual)
Cable Support Kit
The following important notes are to be followed for the selection of a location before
installing the BDU:
The unit is not waterproof and it must be kept away from any water splashes.
The ambient temperature and humidity in the selected location must meet the
requirements given in the unit’s specification.
Ambient Temperature
-25ºC to +55ºC
Relative Humidity
Up to 95% at +40ºC.
The unit shall be kept away from direct sunlight.
The unit shall be placed as far as possible away from any high vibration and shock
areas (for example, motor engine and generator).
The unit shall be kept away from other electronic equipment.
The unit must follow the recommended compass safe distance of 1 meter to prevent
any interference to a magnetic compass.
For maintenance, the unit’s location has sufficient space at its sides and rear.
