Page 21 of 41
iFleetONE™ Terminal Installation Manual
1.5.5 Antenna Mast
The physical size of an antenna mast must be able to support the weight and size of the
antenna unit. Additionally, the antenna mast must be able to withstand on-board vibrations
and wind speed (up to 100 knots) on the antenna radome. An example of the antenna
mounted in a suitable mast is illustrated as below
Recommendations of the antenna mast include:
The mast should provide the internal hole for the installation of the antenna / coaxial
cable
The flange (known as the top plate) of the mast shall meet the dimensions of the
ADU’s mounting base where there are 6 fixing holes.
The rubber gasket is required to be inserted between the ADU mounting base and
the flange
.
A: Use M6x35 Hex Head Screw
bolts (6x) into the threaded holes
of ADU Mounting Base for
mounting the ADU.
